Deionized Water Car Wash Filter, 2 x 0.5L Resin

Spot-free deionized water filter delivers a final rinse that dries clean—no towel wiping—by removing dissolved minerals that cause water spots. Designed for car wash finishing, this deionized water system uses two color-changing mixed-bed resin cartridges in a clear housing, so you can monitor resin life at a glance. Ideal for quick, consistent results on vehicles and exterior glass.

• Delivers a spotless final rinse by reducing calcium, magnesium, and other dissolved ions.


• Includes 2 x 0.5L color-changing mixed-bed resin for clear, simple replacement timing.


• Shows resin status through the transparent housing: purple = usable, brown = replace.


• Mounts securely with the included wall bracket for organized setup near your water source.


• Supports cars, RVs, motorcycles, and windows for spot-free rinsing across multiple surfaces.

Use it as the last step of your wash routine: rinse with regular water, soap, rinse again, then switch to deionized water for the final rinse and let the surface air dry naturally. Under average 200 ppm water conditions, it’s rated for up to 50 gallons (189 L) of purified water capacity, helping you keep washes moving without constant changeouts. Grab yours today and keep your rinses cleaner, faster, and more consistent.

• Working temperature: 39–111°F (4–44°C)


• Filter media: color-changing mixed-bed resin


• Resin volume: 2 x 0.13 gal (2 x 0.5 L)


• Rated purified water capacity: up to 50 gal (189 L) at ~200 ppm source water


• Inlet working pressure: 3–8.6 MPa


• Dimensions: 9.45 x 5.12 x 13.4 in (240 x 130 x 340 mm)


• Net weight: 7.17 lb (3.25 kg)