Nexa Built-In Receiver for Awnings and Projector Screens, 2 x 1000W, 433.92 MHz

Produktoptionen

CHF 34.00  CHF 30.00

Derzeit nicht verfügbar

    Sicher bezahlen mit

    • Twint
    • Apple Pay
    • Google Pay
    • Visa
    • Mastercard
    • American Express
    • Klarna
    Fragen zu diesem Artikel?

    Produktinformationen

    Control awnings, projector screens, roller blinds and more wirelessly with a built-in receiver that works from a remote, a wall transmitter or a smart home bridge. Automatic motor and end-position calibration simplifies setup, and potential-free relay connections extend use to low-voltage DC motors that accept a control signal.

    • Controls awnings, projector screens and roller blinds wirelessly on 433.92 MHz with a range of up to 30 metres.
    • Calibrates motor and end positions automatically for quick, accurate setup after installation.
    • Stores up to 3 favourite scenarios in smartmode, activated with a compatible smartmode transmitter.
    • Supports low-voltage DC motors with control-signal input via potential-free relays (not polarity reversal).
    • Handles a max load of 2 x 1000 W while drawing less than 1 W in standby.

    Designed mainly for use with the matching awning remote control, the receiver also works with the system's other remote controls, wall transmitters and a compatible smart home bridge, so it slots into an existing setup. With 32 memory slots, several transmitters can be paired with the same installation. It is made for fixed installation on 220–240 V ~50 Hz in indoor locations. Upgrade your shading to wireless control and adjust it without leaving your seat.

    Specifications
    • Type: Built-in receiver for awnings, projector screens, roller blinds and more
    • Protocol: 433.92 MHz
    • Range: Up to 30 metres
    • Memory slots: 32
    • Power source: 220–240 V ~50 Hz (fixed installation)
    • Max load: 2 x 1000 W
    • Standby consumption: Less than 1 W (standby mode)
    • Environment: Indoor use
    • Calibration: Automatic motor and end-position calibration
    • Relay connections: Potential-free, also for low-voltage DC motors controlled via control signal (not polarity reversal)
    • Smartmode: Up to 3 favourite scenarios
    • Compatibility: Matching awning remote control, the system's remote controls, wall transmitters and smart home bridge
    • E-number (SE): 1711384
    • EL-number (NO): 4514572

    Lieferung und Rückgabe

    Welche Lieferoptionen gibt es?

    Bestellungen in die Schweiz werden mit Swiss Post zugestellt. Einzelheiten findest du in unseren Versandinformationen. Verfügbare Optionen und Kosten werden an der Kasse angezeigt.

    Versandinformationen
    Wie kann ich einen Artikel zurückgeben?

    Unsere Rückgabebedingungen erklären die Voraussetzungen und die Anmeldung einer Rückgabe.

    Rückgabebedingungen
    Ist dein Artikel beschädigt angekommen?

    Nutze das Kontaktformular und gib deine Bestellnummer sowie eine Beschreibung des Problems an. Falls wir Fotos benötigen, melden wir uns bei dir.

    Kontakt

    Zuletzt angesehen